Introduction
The purpose of this white paper is to: foster understanding and transparency of analytical methods necessary to update and describe climate, including possible changes in the frequency...

Review of Climate Science for Engineering Practice
Weather and climate are a factor in civil engineering design and practice. Weather is defined as the state of the atmosphere with respect to wind, temperature, cloudiness, moisture, pressure,...

Incorporating Climate Science into Engineering Practice
This section provides a review of engineering practices and discusses how engineers canconsider climate change in their practice, given the uncertainty of the future....

Civil Engineering Sectors
This section reviews the challenges for engineering practice posed by climate variability for the following traditional infrastructure sectors and special themes....

Research, Development, and Demonstration Needs
Research, development and demonstration (RDD) is needed to advance recommended civil engineering practices and standards in order to effectively address climate change impacts. Wilbanks...

Summary, Conclusions, and Recommendations
Civil engineers have responsibilities for the planning, design, construction, operation and maintenance of physical infrastructures. These infrastructures include all types of buildings,...

Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...

Selected Coastal Engineering Papers of Robert L. Wiegel
Civil Engineering Classics
Sponsored by the Coastal Zone Management Committee of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This collection contains 54 papers and...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Three
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Lessons Learned from the December 26, 2004 Sumatra Quake and Tsunami
On December 26, 2004, a devastating earthquake occurred off the western coast of Sumatra, Indonesia, creating seismic and tsunami waves felt by people who live around the Indian Ocean....

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Introduction
Permafrost is defined as soil that remains frozen for more than two years. At elevations less than 304.8 m (1000 ft.), it is frequently encountered north of latitude 60. It may also be...

Celerity: Wave Action
This chapter discusses the tabulation of wave action data in Microsoft Excel....

A Dynamic Climate Downscaling Prediction System for N.E. Brazil
The International Research Institute for climate prediction (IRI) is collaborating with several levels of government and various local and foreign researchers in several key disciplines...

Berm Breakwaters?Design, Construction and Monitoring
The philosophy of the fieldwork of Berm breakwaters was applied in Iceland. A few case histories were described with emphasis on quarry investigations, design, construction and monitoring....

Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...

Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...

Advances in Buoy Technology for Wind/Wave Data Collection and Analysis
Considerable advances have been made recently to reduce the cost of gathering meteorological and oceanographic data from coastal waters, especially for meteorological and oceanographic...

 

 

 

 

Return to search